FIDA SVRU NOEN
106 www.petsafe.net
Tools required
•Pencil •Screwdriver
•Ruler •Tape measure
•Jig or Keyhole Saw •Glue
•Electric Drill •Sand paper
•7 mm Drill bit
During installation great care must be taken using drills or other cutting equipment. If you are at all
in doubt then please hire the services of a qualified professional to fit the cat flap for you.
We do not accept any responsibility for openings that are formed or modified in doors, walls or windows. We do not accept any
responsibility for damage caused to doors, walls or windows in the forming or modification of such openings or any costs associated with the repair or
reinstatement of doors, walls or windows.
How it Works
Your Petporte smart flap
®
Microchip Cat Flap has been designed to allow your animals easy access to the outside world whilst keeping other troublesome cats
out of your house. The Petporte smart flap
®
cat flaps do not require your animals to wear collars or accessories.
The Petporte smart flap
®
Microchip Cat Flap reads the unique identification number stored on your cat’s microchip that your vet has implanted in your animal.
Whenever your cat passes under the porch of the cat flap, the system scans the unique number and, if that number matches the number already programmed
in for that cat, it will unlock the cat flap and allow the animal to enter. If the animal has not been programmed into the system then the number scanned will not
match and the cat flap will remain locked preventing access to your property.
If you are not sure whether your cat has a microchip, then just ask your vet to scan for it. The Petporte smart flap
®
is designed to read the most common type of
microchip, the FDX-B (15 digit): it will not read other types of microchips. If you are not sure what type of microchip your cat has, then please either ask your
vet or visit www.petsafe.net and navigate to our Chip Checker microchip compatibility checker to verify that your microchip is compatible.
Whilst the Petporte smart flap
®
works with the most common microchips used in the United Kingdom and Europe (FDX–B 15 digit microchips) there are a small
number of cats that have microchips without the necessary range to reliably operate the Petporte smart flap
®
. Occasionally microchips migrate to positions
within the cat that the scanner cannot read reliably. In these cases the Petporte smart flap
®
can only be used as a cat flap without the selective entry. Therefore,
before the Petporte smart flap
®
is actually fitted to the selected door or wall we strongly advise you that your Petporte smart flap
®
unit should be assembled,
powered up, programmed for your cat and that you have ensured that the unit will work with the microchip in your animal at the same distance as your cat will
be approaching the Petporte smart flap
®
when it is installed.
Please read these instructions fully prior to forming or modifying an opening in your selected door or wall.
We strongly recommend that your Petporte smart flap
®
is assembled, powered up and programmed for your cat and a check made that it works with the
microchip in your cat first.
Installation in a Metal Door: Prior to installation it is recommended to check if the Petporte smart flap
®
will operate properly with your metal door. To
do this, hold the assembled and programmed Petporte smart flap
®
up to the metal door and bring your cat up to porch. If the lock releases, the door will
function properly when installed.
Comments to this Manuals