Petsafe Pawz Away® Outdoor Pet Barrier User Manual download pdf (Page 10)

10 Customer Care Center 1-800-732-2677

Additional tips for laying out your boundary wire:

Always use gradual turns (• 4B) at the corners with a minimum of 3 foot radius to

produce a more consistent boundary. Do not use sharp turns (4C), as this may cause

gaps in your boundary.

Avoid making passageways too narrow for your pet to move about freely (e.g., along the •

sides of a house).

4B 4C

Sample Layouts

Perimeter Loop

(Single Loop)

The Perimeter Loop is

the most common layout.

This will allow your pet

to freely and safely roam

your entire property while

protecting gardens (4D),

children’s play areas (4E)

and landscaping.

Barrier

Transmitter

Barrier

Area

Wire

Barrier

Transmitter

Barrier

Area

Wire

Connect the Wires to the Barrier

Transmitter

Remove the battery door from the Barrier Transmitter 1.

by loosening the 4 Phillips head screws. Remove the

4 D-batteries if you had already placed them inside

the transmitter.

Locate the switch inside the battery cavity. This switch 2.

allows the Barrier Transmitter to operate as a wireless

(internal antenna) or wired (external antenna) unit.

Move the switch to the “External” option so that the

radio signal is sent through the wire (5A).

Using the wire stripping pliers, strip about ¼ inch of 3.

insulation from the ends of the Boundary Wire. Use

pliers to bend each end of the wire to form a 90 degree

angle (5B).

Step

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments

Petsafe Pawz Away® Outdoor Pet Barrier User Manual Page 10

Comments to this Manuals

Related products and manuals for For pets Petsafe Pawz Away® Outdoor Pet Barrier