Smart Dog®In-ground Pet FencingSystemSD-2100, SD-2200Operation GuideThank you for purchasing the Smart Dog In-ground PetFencing System.This electronic
Innotek, Inc. (800)-826-5527 www.innotek.netHere are some examples of wire coverage:The above figures assume a rectangular layout and actualfootage m
Innotek, Inc. (800)-826-5527 www.innotek.netto the perimeter location of the boundary wire. Make sure thatthe wire length is adequate to route wire
Innotek, Inc. (800)-826-5527 www.innotek.net1. Installing the Lightning ProtectorIf possible, avoid plugging the unit into an outlet that is pro-tect
Innotek, Inc. (800)-826-5527 www.innotek.net2. Adjusting the Containment FieldThe width of the containment field is adjusted using the trans-mitter&a
Innotek, Inc. (800)-826-5527 www.innotek.netRepeat the test from Step H.3 until you are satisfied with thefield width setting. As you approach the bo
reduction in the containment field width may occur andis dependent on the length of wire being used and thecontainment field width distance setting. T
Innotek, Inc. (800)-826-5527 www.innotek.net4. Never call or pull a dog into the containment field.5. Keep training sessions brief (10 to 15 minutes)
Innotek, Inc. (800)-826-5527 www.innotek.netDog Response Problems:1. Dog appears to not "feel"the stimulation.Possible Solutions:1. Collar
Innotek, Inc. (800)-826-5527 www.innotek.net18.1. Dog appears to not "feel" the stimulation. (continued)2. Dog appears to "feel"
Innotek, Inc. (800)-826-5527 www.innotek.net5. Dog receives stimulations in the safe part of the yard. (continued)6. Dog receives stimulation insidet
Innotek, Inc. (800)-826-5527 www.innotek.netINTRODUCTIONYour new electronic containment system has a wall-mount transmitter, a collar receiver, and b
The leads, trainers, flags and the collar receiver signals are all training clues for your dog. During the last three weeks oftraining --one by one--a
Innotek, Inc. (800)-826-5527 www.innotek.netIf you have any questions about your containment sys-tem, or about training your dog, please review the v
Innotek, Inc. (800)-826-5527 www.innotek.netB. Wire Break Location Test ProcedureSD-2200 Model ONLYThe wire break location test procedure is used to
Innotek, Inc. (800)-826-5527 www.innotek.netlight with an alarm, the transmitter is malfunctioning. b. If the green light is solid on the transmitte
2. Disconnect the boundary wires from the transmitterLOOP terminals. 3. Bend the leads of the RF Choke into the shapeshown in figure. 4. Carefully w
Your system requires very little maintenance. The walltransmitter is not waterproof and must be protectedfrom the weather. It should never be immers
LAR PURPOSE. Otherwise all implied warranties arelimited in duration to one year from the date of originalretail purchase. THERE ARE NO OTHER WAR-RAN
Innotek, Inc. (800)-826-5527 www.innotek.net27
2100218-1
Innotek, Inc. (800)-826-5527 www.innotek.netwhere you will be able to hear any alarms. Making surethe POWER switch on the transmitter is in the OFFpo
Innotek, Inc. (800)-826-5527 www.innotek.netnot wearing the collar and no one is touching the collarreceiver probes, set the FIELD WIDTH knob to MIN
Innotek, Inc. (800)-826-5527 www.innotek.netBattery Backup Monitor will sound to indicate the AA batteriesneed to be changed. This alarm can be turn
Innotek, Inc. (800)-826-5527 www.innotek.netA. Special Features to Increase the Effectiveness ofthe System 1. The Warning Tone - With the STIM LEVEL
SECTION 4. INSTALLING THECONTAINMENT SYSTEMA. Creating the Layout - When selecting a layout for yourcontainment system, keep it simple; complex instal
Innotek, Inc. (800)-826-5527 www.innotek.netthe opposite side of the house. When at a distance from thecorner of the house equal to the containment
Innotek, Inc. (800)-826-5527 www.innotek.netFasten the mounting plate to the mounting location using thesupplied screws.3. Install Power Backup Batte
Comments to this Manuals