ultrasmart®in-ground fence™operating and training guideModel NumberPIG00-13619PLEASE READ THIS ENTIRE GUIDE BEFORE BEGINNING
10 Customer Care Center 1-800-732-2677To Twist the Boundary Wire Twisting the Boundary Wire cancels the signal and allows your pet to cross over that
www.petsafe.net 11 Prepare the Fence TransmitterThe Fence Transmitter is the system’s control center. Lift the hinged front cover to reveal the swit
12 Customer Care Center 1-800-732-2677Connect the Wires to the Surge Protector and Fence Transmitter (USA and Canada)Surge ProtectionLightning strike
www.petsafe.net 13 6. Insert the ends of the twisted transmitter wires into the right 2 black connectors at the bottom of the Surge Protector label
14 Customer Care Center 1-800-732-2677PerfectFit™ Test for Collar FitThis test is an added feature to verify fit but is not required for the system to
www.petsafe.net 15 Set the Field Width and Test the Receiver CollarWith the Boundary Wire in place and properly connected and the Receiver Collar f
16 Customer Care Center 1-800-732-2677Install the Boundary Wire• Underground cables can carry high voltage. Have all underground cables marked befor
www.petsafe.net 17 Place the Boundary FlagsThe Boundary Flags are visual reminders for your pet of where the Warning Zone is located. 1. Place the
18 Customer Care Center 1-800-732-2677To assure a proper fit, please follow these steps:1. Turn the Power OFF at the Fence Transmitter.2. Start with
www.petsafe.net 19 Training GuideBe Patient With Your PetImportant: Proper training of your pet is essential to the success of the PetSafe® In-Groun
2 Customer Care Center 1-800-732-2677Important Safety InformationExplanation of Attention Words and Symbols used in this guideThis is the safety aler
20 Customer Care Center 1-800-732-2677Steps:1. Begin by walking your pet on a leash in the Pet Area. Calmly praise and talk to your pet. 2. Move to
www.petsafe.net 21 Days 5 thru 8 - Distraction PhasePerform three training sessions per day, each lasting 10 to 15 minutes.Goal:To train your pet to
22 Customer Care Center 1-800-732-2677Taking Your Pet Out of the Pet AreaImportant: Remove the Receiver Collar and leave it in the Pet Area.Once your
www.petsafe.net 23 Additional Information• Use care when using a weed eater or when digging near the Boundary Wire to prevent damage. • The system
24 Customer Care Center 1-800-732-2677No status light on the Fence Transmitter and alarm is silent.•Verify the transmitter power is ON.•Check that
www.petsafe.net 25 Transmitter Loop Test (USA and Canada)The Transmitter Loop Test is a simple test to determine the cause of a “Boundary Wire Broke
26 Customer Care Center 1-800-732-26773. Bend the leads of the RF Choke into the shape shown (14A). 4. Carefully wrap the RF Choke leads around the
www.petsafe.net 27 ComplianceFCC/CanadaThis Class B digital apparatus complies with Canadian ICES-003. This equipment has been tested and found to c
Radio Systems® Corporation10427 PetSafe WayKnoxville, TN 379321-800-732-2677www.petsafe.net400-1427/1Covered by US Patents 6,184,790; 6,327,999; 6,459
www.petsafe.net 3 This PetSafe® In-Ground Fence™ is not a solid barrier. This system is designed to act as a deterrent to remind pets by Static Corr
4 Customer Care Center 1-800-732-2677Thank you for choosing PetSafe®, the best selling brand of electronic training solutions in the world. Our missi
www.petsafe.net 5 ComponentsBoundary Flags - 50PowerAdapterBoundary Wire - 500 ft.Wire NutsSurgeProtector(USA & Canada only)Receiver CollarCharg
6 Customer Care Center 1-800-732-2677How the System WorksA radio signal is sent by the transmitter to a receiver located on your dog’s collar. The si
www.petsafe.net 7 Operating GuideInstall the Fence TransmitterPlace the Fence Transmitter:• In a dry, well ventilated, protected area (1A, 1B).• I
8 Customer Care Center 1-800-732-2677Lay Out the System Basic Planning TipsUnderground cables can carry high voltage. Have all underground cables mar
www.petsafe.net 9 EFBADCEFCADB5’5’3FSample 3 (3F): Front or Back Yard Only (Double Loop) From the Fence Transmitter, run the wire to A, A to B, B to
Comments to this Manuals