Petsafe Pawz Away® Extra Outdoor Pet Barrier User Manual download pdf (Page 11)

www.petsafe.net 11

Troubleshooting

Barrier Transmitter

does not appear to work

Check segment indicator on Barrier Transmitter.•

Check/replace batteries in Barrier Transmitter.•

Increase the Barrier Area range on the Barrier Transmitter.•

Barrier Area range is

too low

Check/replace batteries in Receiver Collar.•

Adjust Barrier Transmitter range to increase Barrier Area size.•

Barrier Area range is

too high

Adjust Barrier Transmitter range to decrease Barrier Area size.•

No segments on Barrier

Transmitter

Press the UP (+) arrow button.•

Check/replace batteries in Barrier Transmitter.•

Black bar(s) appear next to

range segment on Barrier

Transmitter display

Contact the Customer Care Center at for assistance.•

Pet receiver stimulation

while indoors

Remove Receiver Collar before bringing dog indoors.•

Adjust Barrier Transmitter range to decrease Barrier Area size.•

Move Barrier Transmitter or Boundary Wire further from house.•

Receiver Collar is not

picking up signal (wire

option only).

Check/replace batteries in Receiver Collar.•

Use Test Light Tool to check for static correction.•

Change switch inside transmitter to Internal and check •

transmitter. If transmitter works and the receiver collar is

picking up the signal, then it is likely that there is an issue with

the Boundary Wire. Turn off the transmitter. Check the wire

connection to the transmitter to ensure connection has not come

loose or is corroded. If there is corrosion, cut out the corroded

wire and reconnect the wire to the transmitter. If the connection

is secure and there is no corrosion then you have a break in

the Boundary Wire. To locate the break, check the boundary

for any signs of damage (i.e. recent digging, aerating, rodent

burrowing or any other noticeable disturbance in your yard next

to the Boundary). If there are no signs of damage, you will need

to carefully pull up the wire to determine where the break is.

Once you have found the break, replace the damaged section of

Boundary Wire with new Boundary Wire. Turn the transmitter

on and test the system before re-installing the Boundary Wire.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Petsafe Pawz Away® Extra Outdoor Pet Barrier User Manual Page 11

Comments to this Manuals

Related products and manuals for For pets Petsafe Pawz Away® Extra Outdoor Pet Barrier