1SAVE THESE INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONSRead all the instructions before using the appliance.To reduce the risk of injury, close supervis
10a. Clean the pump more frequentlyb. Clean with regular white vinegar and let the vinegar soak for several minutes down inside the pump’s cavityc.
11MANUFACTURER’S SAFETY INSTRUCTIONSThe electrical use of this appliance is 3 watts.Close supervision is necessary when any appliance is used by or ne
2Table of ContentsImportant Safety Instructions...Components...
31) As with any electrical device, check the electrical cord for any tears or damage before use.2) Make sure the inline plug is fully connected (Fig
4OPERATING INSTRUCTIONS5) Make sure the pump is inside the bowl’s square indention and positioned with the pump tube in the back left corner. Gently
5The fountain must be cleaned on a regular basis to continue working normally!FILTERS: CHANGE EVERY 2 to 4 WEEKSFOUNTAIN: CLEAN ONCE A WEEK1) Filter
68) Once the fountain is completely disassembled, you will have four plastic parts, a stainless steel bowl and ramp, charcoal filter and the pump. 9)
7PUMP MAINTENANCE1) Remove the pump from the fountain as explained in the Fountain Disassembly and Cleaning section (Steps #4-6).2) Once the pump is
81) Place the pump inside the bowl’s square indention (Fig. 15a) with the circular opening on the pump positioned in the back left corner. Insert the
9REASSEMBLY OF YOUR FOUNTAIN3) Take a new filter and rinse under cold water to remove any excess charcoal dust. Insert the filter into the housing an
Comments to this Manuals