Petsafe In-Ground Fence Kit User Manual download pdf (Page 5)

www.petsafe.net 5

Function and Response Table

Indicator Light

Response

Mode Receiver Collar Function Temperament of Pet

1 Flash 1 Tone and Vibration Timid

2 Flashes 2 Tone, Vibration and Static

Correction (Low)

Timid or Average

3 Flashes 3 Tone and Static Correction

(Medium)

Average

4 Flashes 4 Tone and Static Correction

(High)

Average or High Energy

5 Flashes 5 Tone only Timid

Flashes once every

4-5 seconds

Low

Battery

Note: Begin training with Mode 3 and only increase if your pet does not respond to the Static Correction.

____________________________________________________

Fit the Receiver Collar

Important: The proper fit and placement of your Receiver Collar is important for

effective training. The Contact Points must have direct contact with your pet’s skin on

the underside of his neck.

To ensure a proper fit, please follow these steps:

1. Make sure that the battery is not installed in the Receiver Collar.

2. Start with your pet standing comfortably (2A).

3. Centre the Contact Points underneath your pet’s neck, touching the skin. If

your pet has a long or thick coat, use the enclosed long Contact Points to

reach through the hair. Note: It is sometimes necessary to trim the hair around

the Contact Points to make sure that contact is consistent.

4. Check the tightness of the Receiver Collar by

inserting one finger between the end of a Contact

Point and your pet’s neck. The fit should be snug but

not constricting (2B).

5. Allow your pet to wear the collar for several minutes,

then re-check the fit. Check the fit again as your pet

becomes more comfortable with the Receiver Collar.

1 2 3 4 5 6 7 8 9 10 ... 19 20

No comments

Petsafe In-Ground Fence Kit User Manual Page 5