Petsafe Pawz Away® Outdoor Pet Barrier User Manual download pdf (Page 6)

6 Customer Care Center 1-800-732-2677

Test the Barrier Area

Keeping your hands away from the Contact Points, 1.

use the edge of the Test Light Tool to turn the receiver

battery door to the ON position.

Hold the Receiver Collar with the Contact Points facing 2.

up. Place the Test Light Tool on the Contact Points so

that the wire in the Test Light Tool touches the Contact

Points (2A). The PetSafe

logo on the Receiver Collar

should face the Transmitter.

Hold the Receiver Collar at the approximate height of 3.

your dog’s neck (2B). Start outside of the range and walk

slowly toward the Barrier Transmitter. As you reach the

Barrier Area, the Receiver Collar emits a series of high-

pitched tones. For each tone you hear, you should notice

the Test Light ﬂ ashing which indicates that a progressive

Static Correction is being delivered. The Receiver Collar’s

tone is easily heard by dogs but may be at a volume level

difﬁ cult for some humans to hear.

Check the range of the Barrier Area from multiple angles 4.

to ensure you are getting the desired coverage.

If you place the Barrier Transmitter close to your house,

the signal may transmit through a wall. Be sure to test

the Receiver Collar inside your home.

Important: Should you ﬁ nd that you are not getting

the desired range at the maximum setting, move the

Barrier Transmitter a few feet. A variety of factors

can affect the magnetic ﬁ eld. For best results, place

the Barrier Transmitter on a non-conductive surface,

i.e., lawn or landscape bed. Metal objects may distort the Barrier Area size.

Do not:

Place Barrier Transmitter on metal surfaces.•

Place Barrier Transmitter near large metal objects such as heating and air •

conditioning units, metal outbuildings, metal trash cans, etc.

Place the Barrier Transmitter in a location where it may become submerged in •

water. The transmitter is designed to be water resistant and is not waterproof.

For the longest battery life, avoid exposing the transmitter to extreme •

temperatures for any extended time.

Fit the Receiver Collar on Your Pet

Important: Proper ﬁ t and placement of your Receiver Collar is necessary for

effective operation. The Contact Points must have direct contact with your pet’s

skin on the underside of his neck.

To assure a proper ﬁ t, please follow these steps:

Using the Test Light Tool, turn the battery door to the OFF position.1.

Start with your pet standing comfortably (2. 3A).

Step

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comments to this Manuals

No comments

Petsafe Pawz Away® Outdoor Pet Barrier User Manual Page 6

Comments to this Manuals

Related products and manuals for For pets Petsafe Pawz Away® Outdoor Pet Barrier