Petsafe Drinkwell Original User Manual download pdf (Page 58)

www.petsafe.net

FOUNTAIN REASSEMBLY

1) Turn the bowl upside down. Reattach the motor by pushing the

threads of the motor through the hole in the bowl. The motor

goes in at a right angle to the bowl, see Figures 6a & 6b. If

you cannot turn the motor into its resting position (Fig. 6b), the

motor is not pushed into the hole as far as it will go.

2) After turning the motor a quarter turn, it should now be even

with the bottom of the bowl (Fig. 6b). Turn the bowl back over.

3) Place the stator over the exposed portion of the motor found in

the bowl. (See Fig. 7)

4) Join the ow control knob and stator together by placing the

tabs of the knob into the groove of the stator. (See Fig. 8)

5) HOLD THESE PARTS IN PLACE with one

hand while attaching the housing with the

other hand (Fig 9). Attach the housing by

sliding the cutout in the wall of the housing

down in between the control knob and stator.

The housing will click into place, when the

side tabs are inserted in the bowl.

Fig. 6a Fig. 6b

Fig. 7

STATOR

Fig. 8

TABS

GROOVE

Fig. 9

1 2 ... 53 54 55 56 57 58 59 60 61

No comments

Petsafe Drinkwell Original User Manual Page 58