Petsafe Drinkwell® Big Dog Pet Fountain User Manual download pdf (Page 5)

www.petsafe.net

As with any electrical device, check the electrical cord for any

tears or damage before use.

Inspect the bottom of the fountain to be sure the motor is

securely attached. (See Fig. 1)

Remove the housing lid and insert the charcoal filter. The

filter will fit diagonally into the housing. The filter fits narrow

side down, with the black side facing the front of the fountain

(toward the spout). The filter will slide easily into place, but

make sure it is pushed all the way down. (See Fig. 2)

DO NOT RUN DRY - FOR INDOOR USE ONLY

OPERATING INSTRUCTIONS

Fig. 1

NOTE: Rinse the filter thoroughly under cool water before placing

in the fountain. This will remove any loose charcoal dust, which is

harmless. A small amount of charcoal dust may shed for the life

of the filter. This is normal and not harmful to your pet.

Place fountain in desired location before adding the reservoir.

If placing on carpet, tile or wood flooring use a protective mat

or other durable, water resistant surface to protect your floors

from splashing or dripping caused by the pet.

Fill both the bowl and the fountain housing with water only until

the water reaches the fill level in the bowl.

Fig. 2

MOTOR

1 2 3 4 5 6 7 8 9 10 ... 66 67

No comments

Petsafe Drinkwell® Big Dog Pet Fountain User Manual Page 5