Petsafe Drinkwell® 360 Pet Fountain User Manual download pdf (Page 10)

www.petsafe.net 11 10 www.petsafe.net

ENFR

6. Next, ﬂip the Bowl upside down and unhook the electrical Power Cord from the two

Cord Clips (Fig. 13). This will allow you to pull the electrical Power Cord through

the Cord Pass-Through in the Bowl (Fig. 14).

7. Remove the Pump for cleaning. First remove the Intake Tube by lifting up on the Intake

Tube Holder to free the Intake Tube from the Pump (Fig. 15 & 16). This will allow

you to remove the Pump. The Intake Tube can then be pulled from the Intake

Tubeholder.

8. Remove the Foam Filter from the Pump. Clean away any hair, debris or pet food that

may have accumulated on the Faceplate of the Pump (See “Pump Maintenance”

section for detailed cleaning instructions for the Pump).

9. Once the Pet Fountain is completely disassembled you will have 8 plastic parts.

10. Clean the plastic Pet Fountain parts with warm water and soap. You can also put

the Pet Fountain in the top rack of the dishwasher. Remove the Pump before placing

the Pet Fountain in the dishwasher. DO NOT PLACE PUMP IN DISHWASHER!

If possible, it is recommended that you turn down the heat of the water inside

thedishwasher.

11 . If you have trouble reaching certain spots or hard-to-reach corners, try using a cotton

swab or purchase the Drinkwell

Cleaning Kit, a 3-Piece Brush Kit. To

purchase a

Cleaning Kit, visit our website at www.petsafe.net to locate a retailer near

you or to

ﬁnd a listing of Customer Care Centre telephone numbers for your area.

Fig. 13

Cord Pass-Through

Fig. 14

Cord Clips

Fig. 15

Fig. 16

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

No comments

Petsafe Drinkwell® 360 Pet Fountain User Manual Page 10