Petsafe PPA00-10984 Instruction Manual download pdf (Page 3)

4 Customer Care Center 1-800-732-2677

www.petsafe.net 5

NOTICE

If painting the pet door, it is recommended to paint it prior to installation.

For best results, use a primer for plastics before applying paint.

Step

Determine Pet Door Location

1A Measure and mark your pet’s shoulder height on the

interior side of door.

1B Determine location for the pet door. Draw a vertical

center line through the shoulder height line using a level.

NOTICE

If homeowner’s door or other application is

not level, the pet door must be marked level to

swing properly.

Prepare Door

2A Remove door by removing door hinge pins.

2B Place on a raised level surface such as saw horses.

Place interior side of door facing up.

Helpful Tip:

Clamp down the door to prevent it

from moving.

Note:

The Pet Door can be installed with the door

hanging based on your skill level.

2C Cut out the correct size template. Match the

marked lines on the door with the shoulder and center

lines on the template. Tape the template in place and

carefully trace template. Make sure to trace under-

neath tape and connect the corners. Now, remove the

template and any excess tape from the door.

NOTICE

When applying cutting template there should be a

minimum of 3” between the bottom and sides of the

door and the outer edge of the cutting template to

maintain the structural integrity of the door.

NOTICE

Cut out correct size template. For the Large, no

cutting is required. If installing in a wall, reduce cut-

out width by 1” for the Small and Medium. For the

Large reduce cut-out width by 1” and cut-out height

by 1”.

Installation Instructions

Thank you for choosing the PetSafe

brand. You and your pet deserve a companionship that includes

memorable moments and a shared understanding together. Our products and training tools promote a

lifestyle of protection, teaching, and love—essentials that inuence memories for a lifetime. If you have

any questions about our products or training your pet, please visit our website at www.petsafe.net or

contact our Customer Care Center at 1-800-732-2677.

PRODUCT WARRANTY

To get the most protection out of your warranty, please register your product within 30 days at

www.petsafe.net. By registering and keeping your receipt, you will enjoy the product’s full warranty

and should you ever need to call the Customer Care Center, we will be able to help you faster. Most

importantly, PetSafe

will never give or sell your valuable information to anyone. Complete warranty

information is available online at www.petsafe.net.

Snap-on

Closing Panel

Interior Frame

with 2 flaps

Plastic Core Covers

Cutting Template

Installation Guide

Exterior Frame

with Flap

Hex Nuts

- Small 4 pcs.

- Medium 6 pcs.

- Large 10 pcs

Nylon Screws

- Small 4 pcs.

- Medium 6 pcs.

- Large 10 pcs.

Core Cover

Supports

Foam Strip

Weather Strips

Kit Includes

• Hammer

• Jigsaw

• Drill

• ½” Drill Bit

• Wire Cutters

• Slotted & Phillips

Screwdrivers

• Tape Measure

• Tape

• Pencil

• Level

• Scissors

• Safety Equipment

Optional

• Duct Tape

• Caulk

Tools Needed

NOTE: The Extreme Weather Pet Door

™

can be installed in most doors and walls.

Installation in thinner or thicker applications may not require the Plastic Core Covers.

If installing in a wall, reduce cut-out width by 1” for the Small and Medium. For the

Large reduce cut-out width by 1” and cut-out height by 1”. Additional tools and

materials, such as wood framing, may be required.

Want Professional Installation Help?

Invisible Fence

Brand installers (where available) may come to your home and install your new PetSafe

Pet Door for an additional cost. Contact the Customer Care Center at 1-877-866-DOGS (3647) or visit

the website at www.invisiblefence.com for more information.

Key Denitions

• Outer Frame Size: Overall pet door dimensions

• Cut-Out Size: Opening cut in homeowner’s door for proper t and pet door installation

• Replacement Flap Size: Overall ap size when removed from pet door. During extreme changes in

weather, vinyl aps can shrink during cold months and stretch in warmer months

• Flap Opening Size: Usable ap size for pet to enter and exit through pet door

• Interior Frame: Pet door frame on the inside of home

• Exterior Frame: Pet door frame on the outside of home

• Insulated Flap: Yellow ap located behind the vinyl ap in the interior frame

• Plastic Core Covers: Plastic pieces that cover the cut-out or “core” of the homeowner’s door

• Snap-on Closing Panel: Cover that snaps onto the pet door frame to close the pet door opening

1 2 3 4 5 6 7

Comments to this Manuals

No comments

Petsafe PPA00-10984 Instruction Manual Page 3

Comments to this Manuals